Skip to content

BuildCalc App Guide: 132 Offline Construction Calculators

BuildCalc by Genzz packs 132 offline construction calculators with feet-inch fractions. Learn how it works, its job packs, and what's free vs Pro.

BuildCalc is an Android construction calculator with 132 trade calculators for concrete, framing, roofing, electrical, plumbing, HVAC and more. It’s made by Genzz, it works fully offline, and you type measurements the way you read them off the tape, in feet, inches and fractions.

On Google Play it’s listed as BuildCalc: Construction Calc, and inside the app it calls itself BuildCalc Pro. Every calculator is free to use. Here’s how it works and how to get the most out of it on the job.

BuildCalc in 30 seconds

  1. Pick a calculator by trade, or reopen a favourite or recent one.
  2. Type your measurements on the glove-friendly keypad, fractions included.
  3. Read the result as you type, with its formula and source shown.
  4. Use a Job Pack to turn one size into a full material list.
  5. Copy, share or read the result aloud, or save it as a project with Pro.

How BuildCalc works

Most construction math starts with a tape measure, so BuildCalc lets you enter 12’ 6 1/2” directly instead of converting to decimals first. Lengths show to the nearest 1/16” (or 1/8” or 1/32”), with decimal feet alongside. One tap switches everything between imperial and metric, and every input and result converts.

Results update as you type, and every one shows how the number was made: exact math, typical manufacturer yields, a named code table such as NEC 2023 Table 310.16 or IFGC Table 402.4, or a clearly labeled rough estimate. Warnings appear when a check fails.

You pick your country once to get the right units, currency, tax and product sizes: 80 lb or 25 kg bags, 4x8 ft or 2400x1200 mm sheets, and US, UK or Australian bricks. Stair and railing checks support US, UK, Australian and New Zealand rules.

Main features

Job Packs: one size, the whole shopping list

Enter the size of a deck, slab, fence, room, roof or patio once and get every material: boards, joists, footings, stairs, balusters and stain; concrete, rebar and gravel; drywall, primer, paint and flooring. You can share the list, and with Pro save it as a project and check items off at the store.

Calculators by trade

  • Concrete: slabs (rectangle, L-shape, circle), footings, columns, steps, bags to yards, rebar with laps, mix ratio, cure time
  • Framing: wall studs, joist span, beam size, stairs and stringers, spiral stairs, baluster spacing, drywall, siding, board feet, crown molding angles, roof trusses
  • Roofing: pitch, roof area, shingles, rafters including hip, jack and valley, metal roofing, underlayment and ridge cap, EPDM, snow load
  • Electrical: wire size, voltage drop, service load, conduit fill, box fill, EV charger load, panel headroom, solar, battery backup, Ohm’s law
  • Plumbing and HVAC: pipe and gas pipe sizing, drain slope, offsets, pressure drop, fixture units, water heater, expansion tank, BTU sizing, R-value, duct size, mini-split, radiant heat
  • Flooring and paint: tile, grout, LVP, laminate, carpet, subfloor, paint, primer, deck stain, wallpaper, spray paint
  • Masonry and landscaping: brick, block with core fill, mortar, plaster, asphalt, pavers, gravel, mulch, topsoil, sod, grass seed, retaining walls, French drains, excavation
  • Measurement, business and tools: feet-inch math, square footage, 3-4-5 squaring, equal spacing, material cost, labor, markup vs margin, a tape calculator, cut list optimizer, level and pitch gauge, and size converters

Built for the field

  • Works fully offline, even in a basement or attic with no signal
  • Big text and buttons, plus a high-contrast Sunlight mode
  • Dark mode and four color themes
  • Keep the screen on, read results aloud, copy or share in one tap
  • Favorites, and recent calculators that reopen with your last inputs
  • Available in English, Spanish, Portuguese, French, German, Hindi, Urdu, Arabic, Indonesian and Turkish

Step-by-step: estimating a concrete slab

  1. Set your country so bag sizes and units match your local store.
  2. Open the concrete slab calculator and choose rectangle, L-shape or circle.
  3. Enter length, width and thickness in feet, inches and fractions.
  4. Read the result as you type, check the formula shown, and use the bags to yards calculator if you’re buying premix.
  5. Watch for warnings, then copy or share the numbers with your crew or supplier.

Tips for better estimates:

  • Use a Job Pack for whole projects. It saves re-entering the same size into five calculators.
  • Check the source line. It tells you whether a number is exact math, a typical yield or a rough estimate, which helps you decide how much extra to order.
  • Favourite the calculators you use daily so they’re one tap away.
  • Turn on Sunlight mode when you’re working outdoors.

For the math behind slab estimates, read our guide on how to calculate concrete for a slab.

Limits to know about

  • Estimates, not approvals. The listing says BuildCalc gives estimates to help you plan and check work. Always follow your local building code, the manufacturer’s instructions and a licensed professional for structural, electrical and gas work.
  • Rough estimates are labeled. Some results are marked as rough estimates rather than exact math or code tables. Treat them as a starting point.
  • Some saving tools need Pro. PDF reports, projects with shopping checklists, and saving Job Packs as projects are Pro features.

Free vs Pro

Free: every calculator, with no limits. The free version shows ads.

Pro is optional and adds:

  • No ads
  • PDF reports for clients and inspectors
  • Projects with shopping checklists
  • Saving Job Packs as projects

Pro comes as a monthly or yearly subscription, or a one-time lifetime unlock. Subscriptions can be cancelled any time in Google Play. There’s no account and no sign-up, and calculations and projects are stored only on your device.

Is BuildCalc right for you?

BuildCalc suits contractors, tradespeople and serious DIYers who:

  • Work in feet, inches and fractions and hate converting to decimals
  • Need numbers on site without a signal
  • Want to see the formula and source behind each result
  • Buy materials for decks, slabs, fences, rooms, roofs or patios

Full details and screenshots are on the BuildCalc app page.

Bottom line

BuildCalc by Genzz puts 132 construction calculators in your pocket, works offline, and speaks tape-measure: feet, inches and fractions to the nearest 1/16”. Every calculator is free, every result shows where it came from, and Job Packs turn one measurement into a full shopping list. Use it to plan and check your work, and keep following your local code and a licensed pro for structural, electrical and gas jobs.

Frequently asked questions

What is BuildCalc?

BuildCalc: Construction Calc is an Android app by Genzz with 132 trade calculators for concrete, framing, roofing, electrical, plumbing, HVAC, flooring, painting, decking, masonry and landscaping. It works offline and results update as you type.

Is BuildCalc free?

Every calculator is free to use with no limits. Pro is optional, as a monthly or yearly subscription or a one-time lifetime unlock. Pro removes ads and adds PDF reports, projects with shopping checklists, and saving job packs as projects.

Can I enter feet, inches and fractions?

Yes. You can type values like 12 ft 6 1/2 in. on a big, glove-friendly keypad with fraction keys. Lengths show to the nearest 1/16 in. (or 1/8 or 1/32) with decimal feet alongside, and one tap switches between imperial and metric.

Where do BuildCalc's formulas come from?

Every result shows its formula and source: exact math, typical manufacturer yields, a named code table such as NEC 2023 Table 310.16 or IFGC Table 402.4, or a clearly labeled rough estimate.

Apps in this guide

Try them free

Keep reading

Related guides

All guides →