How to See Who Is Connected to My WiFi (and Kick Them)
How to see who is connected to your WiFi from your phone or router, spot unknown devices, kick them off and lock down your network with a new password and WPA3.
To see who is connected to your WiFi, open your router’s admin page (usually by typing your gateway address, like 192.168.0.1 or 192.168.1.1, into a browser) and look for Connected devices or DHCP clients. From your phone, you can also use your router’s app or a network scanner app to list every device on your network. If you spot one you don’t recognize, block it in the router and change your WiFi password.
Here’s how to do each step, how to tell harmless devices from real intruders, and how to stop it happening again.
Quick steps: see who’s on your WiFi
- Connect to your home WiFi on your phone.
- Find your router’s address (the gateway) in your phone’s WiFi details or on the router’s label.
- Log in to the router’s admin page or open your router or ISP app.
- Open the device list: Connected devices, Attached devices, Client list or DHCP clients.
- Match each device to something you own. Phones, laptops, TVs, speakers, plugs, cameras.
- Block anything unknown and change your WiFi password.
- Turn on WPA3 (or WPA2/WPA3) and update your router’s firmware.
Method 1: Check your router’s admin page
Your router keeps the most accurate list of who’s connected because it hands out every address.
Find your router’s IP address on Android
Open Settings > Network & internet > Internet (or Settings > Connections > Wi-Fi on Samsung), tap the gear or arrow next to your WiFi network, and look for Gateway or Router, sometimes under Advanced. Common addresses are 192.168.0.1, 192.168.1.1 and 10.0.0.1. The address is also often printed on a sticker on the router.
Log in and open the device list
Type the address into your browser. You’ll need the router’s admin username and password, which is different from the WiFi password. It’s usually on the router sticker unless you changed it. Look for a section named Connected devices, Attached devices, Device list, Client list or DHCP clients.
Many ISPs and mesh systems also have their own app that shows the same list in a friendlier way.
Method 2: Use a WiFi scanner app (the easiest option)
If you don’t want to dig through router menus, a network scanner can list devices from your phone in seconds.
WiFi Scanner: Who’s On My WiFi does this along with a few other useful checks. Based on its Play Store listing, it:
- Scans your network and lists devices with IP address, device name and vendor where available, so you can spot unknown devices
- Shows your gateway, local IP, subnet and public IP, handy for finding your router’s admin address
- Runs a WiFi security check on encryption, nearby open networks, DNS and connection health, with Pass, Caution or Risk results
- Includes a speed test (download, upload, ping and jitter) with history, so you can see if extra devices are slowing you down
- Has a channel scanner and signal meter to find a less crowded channel and WiFi dead zones
It has no ads, no account and no in-app purchases, and WiFi scans stay on your device. Device discovery works locally without internet. Android requires Location permission, with Location turned on, for any app to scan WiFi networks. The app says it uses it only for scanning.
Keep two limits in mind. First, some phones hide their names, so not every device can always be identified. Second, the app measures and recommends. It doesn’t change your router settings, so you’ll still block devices and change passwords in the router itself.
How to identify unknown devices on your network
An “unknown device” is usually something you own. Before you panic:
- Count your own gadgets. Smart TVs, streaming sticks, game consoles, printers, smart speakers, doorbells, cameras, plugs, light bulbs, robot vacuums, thermostats and even some appliances all join WiFi.
- Check the vendor name. A vendor like a TV, printer or smart-plug brand usually points to something in your home.
- Expect private MAC addresses. Modern Android phones and iPhones use a randomized MAC address for each network by default. They often show no vendor and no name. That’s normal.
- Turn things off one at a time. Switch off a device’s WiFi, rescan, and see which entry disappears.
- Ask your household and guests. A visitor from last weekend may still be connected.
Red flags: a device that appears at odd hours, a large number of unknown entries, a sudden slowdown you can’t explain, or your WiFi password having been shared widely.
How to kick someone off your WiFi
Block or pause the device in your router
In the router’s device list, most routers offer Block, Pause or Remove next to each device. Some call it access control or a blocklist. This works immediately but isn’t bulletproof: a determined person can change their MAC address and reconnect.
Change your WiFi password (the reliable fix)
Go to Wireless or WiFi settings > Security in your router and set a new password. Everyone is disconnected and only people with the new password can rejoin.
Make it strong:
- At least 12 characters, ideally a passphrase of several random words
- Not your name, address, phone number or pet’s name
- Not reused from any other account
You’ll need to reconnect your own devices afterward, including smart home gadgets. It’s a small price for a clean slate.
Change the router admin password too
If someone knows your admin password, they can just look up the new WiFi password. Change the default admin login to something unique.
Lock down your WiFi so it stays private
Use WPA3 (or WPA2/WPA3)
In the router’s security settings, choose WPA3-Personal if all your devices support it. If older gadgets can’t connect, use WPA2/WPA3 mixed (transition) mode. Avoid WEP, WPA and TKIP. They’re outdated and much easier to break. A scanner’s security check can show you which encryption your network is using.
Turn off WPS
WPS (the push-button or PIN pairing feature) has a history of security weaknesses. Turn it off unless you truly need it.
Update your router firmware
Router makers patch security holes. Check for updates in the admin page or app, and turn on automatic updates if offered. If your router no longer gets updates, it may be time to replace it.
Set up a guest network
Give visitors and smart home devices a guest network with its own password. It keeps them away from your laptops and phones, and you can change that password often without disrupting everything.
Turn off remote management
Unless you need to manage your router from outside your home, turn off remote administration.
A note on privacy and safety
Only scan networks you own or have permission to check. If you think someone is deliberately getting into your network or your devices to monitor you, don’t confront them. Take screenshots of what you find, secure your router as above, and check your phone too with our guide on how to check for spyware on Android. Our Android privacy checklist covers the rest of your phone’s settings. If you feel unsafe, contact local law enforcement or a support organization.
Is my WiFi slow because of other devices?
Sometimes. Lots of devices streaming at once will slow things down, but so can a crowded channel, a bad router spot or your ISP. Run a speed test with everyone off, then again with normal use. If speed is poor even when the network is quiet, try changing your router channel or moving the router. And if you keep falling back to mobile data, see how to save mobile data on Android.
Bottom line
To see who is connected to your WiFi, check your router’s device list or scan from your phone with an app like WiFi Scanner. Most “unknown” devices are your own gadgets, so match them before you worry. If something truly doesn’t belong, block it, change your WiFi and admin passwords, switch to WPA3 and keep the router updated. That shuts the door, and it stays shut.
Frequently asked questions
Can I see who is connected to my WiFi from my phone?
Yes. You can log in to your router's admin page in your phone's browser or use your router maker's app. A network scanner app can also list devices on the WiFi network you are connected to, with their IP address and, where available, device name and vendor.
Why do some devices on my WiFi show as unknown?
Many phones and tablets use a randomized private MAC address and hide their device name, so scanners and routers cannot always tell what they are. Smart home gadgets often show only a manufacturer name. Count your own devices first before assuming an intruder.
Will changing my WiFi password kick everyone off?
Yes. Every device using the old password disconnects and must reconnect with the new one. It is the most reliable way to remove someone you do not want on your network.
Can someone see what I browse if they are on my WiFi?
Most websites and apps use encryption (HTTPS), so another device on your network cannot read that content. They can use your bandwidth and may be able to see other devices on the network, which is why removing unknown devices and securing your router matters.


